Back to Lure Mold Index
| Back to Catalogue Main Index
BUZZ BAIT MOLDS
BUZZ-SPIN LURES The
Buzz-Bait Lure features a flat, heart shaped body designed to keep the lure at
the surface when used in conjunction with a delta blade. The retrieve is started
as soon as the lure hits the water. The delta blade churns the water at the
surface creating a commotion that is a super fish attraction. It is very
effective on game fish such as bass, northern pike and muskies.
Molds listed above are in-stock
and ready to ship.
CASTING & ASSEMBLING Buzz
Bait Lures: Use the required wire form in
each cavity. Buzz bait wire form # 76-01-38 should be used in 3/8 and 1/2 oz.
sizes. Form # 76-01-14 in 1/4 oz. and Form # 76-01-18 in 1/8 oz. sizes. There is
some flexibility regarding hook sizes, but best results will normally be
obtained with the size recommended. Place the eye of the hook over the end loop
of the wire form. With pliers, pinch the end loop tightly on the hook. Insert
the form in the mold and cast. Ladle pouring is recommended because the wires
protrude from the top of the mold, however, some types of bottom pour furnaces
can be used to cast these lures.
Assembling Buzz-Bait Lures is very easy. Simply
slip a Buzz Bait Blade on the wire shaft followed by a blade
rivet or bead to act
as a bearing surface. For even more vibration, counter turning tandem blades
with a bead between for a spacer can be substituted for the Delta Blade. After
installing the blades, bend down the last 1/16 inch of the wire form to keep
everything in place, slip on a rubber skirt or tie material and the lure is
complete. *Designed for ladle pouring — not intended for use with bottom pour