Click for inside view
Our 2" and 3" Rattleshad have recessed eyes
to accept 5/32" Soft Molded 3D eyes or our prism tape
eyes. These lures require weighted noses in order to run correctly. It is very
important to insert the minimum number rattle beads in the nose chamber. We
recommend 30-50 small sized rattle beads in the nose chamber and an additional 10
or so beads in the rear rattle chamber. Completed weight should be about 3/8 oz.
Each package of 50 lures include, 50 male halves
, 50 female halves, 150 wire inserts. Some of our rattleshads accept 5/32"
soft molded 3D eyes or our
prism tape eyes (not included in kit). See table for eye size, split ring, and
We are closing out
all unglued plastic lure bodies. Limited to existing inventory.
These high quality natural ABS unglued
rattle shad bodies are made to our high standards. Each body comes in two halves ready for
customizing. Just insert the required figure "8" forms and required
rattle beads then glue using MEK (Methyl Ethyl Keytone) or Testors plastic cement and paint as desired.
Customize the baits by painting your
own custom colours and patterns. Apply scale holoform tape to the sides of the baits and
clear coat. The possibilities are endless.