|
|
SHALLOW FAT DIVERS Our high quality clear unglued fat diver bodies are made to our high standards. Each body comes in two halves ready for customizing. Just insert the required figure "8" forms and optional rattle beads then glue using ABS Cement, ABS/PVC Transition Cement, MEK or Testors plastic cement and paint as desired. Customize the baits by painting your own custom colours and patterns, or insert prism tape and leave bait clear for interesting effects. 3" Fat Shallow Diver Our clear 3" Fat Diver is made with recessed eyes to accept 5/32" or 7/32" Soft Molded 3D eyes or our prism tape eyes. This lure will rise back to the surface unless you add weight to the weight chamber. Vary the added weight to change the action of the lure and easily make floating, suspending or sinking lures. Uses three special 277 figure "8" wire form.
3-1/2" Fat Shallow Diver Our clear 3-1/2" Fat Diver is made with recessed eyes to accept 5/32" or 7/32" Soft Molded 3D eyes or our prism tape eyes. This lure will rise back to the surface unless you add weight to the weight chamber. Vary the added weight to change the action of the lure and easily make floating, suspending or sinking lures. Uses three special 277-250 figure "8" wire form.
FIGURE "8" INSERTS Each diver requires three figure "8"'s per bait. One is for the line attachment and two are for hook attachments.
RATTLE BEADS You can optionally insert rattle beads inside these divers while gluing to create extra loud rattling divers. Insert 3-8 rattles per bait.
|
|