This item has been replace with CS Clear Coat
||Our best, high gloss, crystal
coat for use on metal, wood and plastic
LureMaking.com's Crystal Clear Lacquer is a high performance
crystal clear coat formulated with anti-oxidant to protect brass and copper spoons
and blades from tarnishing in both fresh and salt water. It is also used
as a finishing top clear coat on wood and plastic body baits.
- Apply on your wood and plastic body
baits to give them a deep high gloss finish that will
withstand chipping and extend the life of your lures.
- You may also apply our Crystal Clear Coat on your painted blades to prevent chipping.
- Our Crystal Clear Coat provides a tough, high gloss final coat on all of your lures.
- Plastic Body Baits
- Polished Brass Spoons and Blades
- Polished Copper Blades
- Wood Body Baits
- Painted Jigs
- Painted Spinner Blades
- You may add metal
flake glitter while stirring to create special effects.
- Dries to a hard, crystal clear high gloss finish.
Stir well before use. Do Not Shake. You may thin with Lacquer Thinner (available at hardware
stores) but this is usually not recommended unless you will be using an air
may apply by dipping, brushing or spraying. One coat is recommended for
brass or copper spoons and spinner blades and two or more coats is recommended for
plastic and wood body baits. Allow all painted lures to cure for at least 72
hours before applying our Crystal Clear Coat Lacquer Sealer. Use in a well ventilated area.
Cyrstal Clear Coat Sealer may only be shipped
If your order contains Clear Cyrstal Coat Sealer it will automatically be shipped ground. We
can not export Cyrstal Clear Coat Sealer.