|
CROAKER FROG MOLDS
Every Frog molds is precision CNC machined one at a time.
Non-stocked molds ( listed in red) will usually ship to you in
2 to 3 weeks.
 |
|
This
frog is a FREAK. Designed from the ground up, the Croaker is modeled after a
boat hull. The front rides very high providing an almost instantaneous pop to
the top. The overly round belly prevents roll. If it does somehow get upside
down all you have to do is stop your retrieve and it will roll back over. The
"rear" of the Croaker models a twin pad design, with a concave section
to trap air and increase water agitation while retrieved. The rear also has an
even lower section that acts like a rudder, making it run straight, but also
creates what would best be described as a subtle chine walk. Overall it
produces a true running bait with unique water agitation and sound.
Injecting
recommendations:
Frog/Toad mold works great as a two color mold. Pour whatever color belly you
want, stopping below the injection gate. Let the plastic firm slightly, close,
clamp and slowly inject your top color as normal. For a super realistic feel use
a medium-soft plastic and then quickly dip just the body in a hard plastic. I
believe pouring it this way makes it feel so real Bass just won't let go. This
is not a tall tale, and may be true of all frogs not just ours, but pouring it
this way, I have literally caught fish on this frog and never put a hook in
them.
| Item
Code |
Mold
Type |
Size
(inches) |
No.
of Cavities |
Price |
| 61-95104 |
Croaker
Frog |
1.75" |
3 |
$117.99 |
| 61-95248 |
Croaker
- Pro Series |
1.75" |
20 |
$655.99 |
| 61-95101 |
Croaker
Frog |
3" |
1 |
$78.99 |
| 61-95102 |
Croaker
Frog |
3.5" |
1 |
$86.99 |
| 61-95103 |
Croaker
Frog |
4" |
1 |
$94.99 |
All CNC molds
are not discountable.
OPEN POUR CROAKER FROG
BELLY MOLD
This
is a 6 cavity belly mold for the 4" Caney Creek Croaker. To
achieve optimum results pour the belly in the Croaker Mold and then inject the
Croaker.
Alternatively,
to help speed up production you can use the belly mold to make your Croaker
bellies and then place them in the Croaker mold and inject them. The less
time you wait between pouring the bellies and injecting the Croakers the better.
The
following can cause your belly to lift in the mold and not stay put while
injecting:
-
Waiting to long between making the belly and injecting the croaker (shrinkage
can occur)
-
Not getting the belly firmly set in the mold
-
Gremlins
Always
wear protective clothing / gloves while working with hot plastic.
| Item
Code |
Mold
Type |
Size
(inches) |
No.
of Cavities |
Price |
| 61-95014 |
Croaker
Belly Mold |
4" |
6 |
$75.99 |
All CNC molds
plates are not discountable.
SWIM TOAD "Big Foot" MOLDS
The
Swim Toad "Big Foot" has great top water action, but really excels
flipping and as a Swim Toad. Toss it around the veggies and buzz it in, or let
it fall and swim it in. You could catch the fish of a lifetime at any point. And
when you do hook-up, there is absolutely no doubt. Bass hit this thing like a
sledgehammer and won't let go.
| Item
Code |
Mold
Type |
Size
(inches) |
No.
of Cavities |
Price |
| 61-95105 |
Swim
Toad Big Foot |
3.5" |
1 |
$83.99 |
| 61-95106 |
Swim
Toad Big Foot |
4" |
1 |
$87.99 |
| 61-95107 |
Swim
Toad Big Foot |
4.5" |
1 |
$90.99 |
All CNC molds
are not discountable.
OPEN POUR SWIM
TOAD BELLY MOLDS
These
are a 6 cavity belly molds for the 4" and 4.5" Swim Toad molds above.
To achieve optimum results pour the belly in the Croaker Mold and then inject
the Croaker.
| Item
Code |
Mold
Type |
Size
(inches) |
No.
of Cavities |
Price |
| 61-95015 |
Swim
Toad Belly Mold |
4" |
6 |
$72.99 |
| 61-95016 |
Swim
Toad Belly Mold |
4.5" |
6 |
$75.99 |
All CNC molds
are not discountable.
Soft Bait molds require the use of an
injector (item code: 61-91345). An injector is
required to inject the heated liquid plastisol into the mold.
Related Items
|
Sales: 1-800-203-8427
