|
TUBE MOLDS
Every Tube mold, tube spline and insert is precision CNC machined one at a time.
Non-stocked molds ( listed in red) will usually ship to you in 2 to 3 weeks. We keep
the inserts and splines in stock.
SUPER SMOOTHY TUBE MOLDS
The
Super Smoothy makes an awesome bait, every time. The spline fits like a glove
and there is no flashing. Add a touch of softener or worm oil to the
insert and it slides right off. The entire bait is smooth giving the
appearance of a hand dipped bait. (NOTE:
see
bottom of this page for inserts and splines. Mold will not work without a
spline and tube insert.)
| Item
Code |
Mold
Type |
Size
(inches) |
Tube
Insert * |
T-Rig
Insert * |
No.
of Cavities |
Price |
| 61-95193 |
Super
Smoothy |
3" |
1-1/4" |
1" |
1 |
$78.99 |
| 61-95281 |
Super
Smoothy |
3.5" |
1-1/2" |
1-1/4" |
1 |
$80.99 |
| 61-95196 |
Super
Smoothy |
4" |
1-3/4" |
1-1/2" |
1 |
$86.99 |
CNC molds
are not discountable.
*
One
insert is needed! Use the shorter T-Rig insert when a tube with thicker head is
wanted. The Tube insert and T-Rig insert are identical, only the overall lengths
are different.
The
spline is the part that makes the tail and the tube insert is the part which
makes the tube hollow.
G-TUBE MOLD
The
4" Tube makes an awesome bait, every time. The spline fits like a
glove and there is no flashing. Add a touch of softener or worm oil to the
insert and it slides right off. The head is smooth and the body has a
unique scallop that really shows off the glitter.
(NOTE:
see
bottom of this page for inserts and splines. Mold will not work without a
spline and tube insert.)
| Item
Code |
Mold
Type |
Size
(inches) |
Tube
Insert * |
T-Rig
Insert * |
No.
of Cavities |
Price |
| 61-95195 |
G-Tube
Mold |
4" |
1-3/4" |
1-1/2" |
1 |
$77.99 |
CNC molds
are not discountable.
GORILLA TUBE MOLDS
The
Gorilla Tube is the second generation bait responsible for many personal bests.
The mold is just like our other tube molds, it makes an awesome bait. The spline
fits like a glove and there is no flashing.
This
is a great bed bait, flipping bait, jig trailer, Carolina rig, T-Rig, etc.
If you haven't fished a tube before this is a great one to start with as it has
lots of movement and is very productive using it the same way you would a
creature bait.
Here's
a fishing tip that works great on most tube baits (T-Rig or C-Rig): plug the
opening of the tube with a small piece of worm and hold it in place with a
toothpick. This will trap the air in the tube and cause it to float off
the bottom. Make sure you don't lay your rod down - you very well could
loose it!!!
(NOTE:
see
bottom of this page for inserts and splines. Mold will not work without a
spline and tube insert.)
| Item
Code |
Mold
Type |
Size
(inches) |
Tube
Insert * |
T-Rig
Insert * |
No.
of Cavities |
Price |
| 61-95192 |
Gorilla
Tube |
3"-
4" |
1-3/4" |
1-1/2" |
1 |
$108.99 |
| 61-95212 |
Gorilla
Tube |
4"-5" |
2-1/4" |
2" |
1 |
$117.99 |
CNC molds
are not discountable.
TUBE MOLDS
These
tubes are just slighty longer and bigger than their Smooth Tube Cousins giving
them a little more bulk for those that are looking for a full dinner plate.
These molds makes an awesome bait, every time. The spline fits like a glove and
there is no flashing. Add a touch of softener or worm oil to the insert and it
slides right off. The head is smooth for easy dipping and the body has a very
small scallop
| Item
Code |
Mold
Type |
Size
(inches) |
Tube
Insert * |
T-Rig
Insert * |
No.
of Cavities |
Price |
| 61-95194 |
Tube
Mold |
3.5" |
1-1/4" |
1" |
1 |
$78.99 |
| 61-95197 |
Tube Mold |
4.5" |
2-1/4" |
2" |
1 |
$94.99 |
CNC molds
are not discountable.
Soft Bait molds require the use of an
injector (item code: 61-91345). An injector is
required to inject the heated liquid plastisol into the mold.
TUBE SPLINES
You have 3 splines to choose from .All work great
with the above tube molds enabling you to give your favorite tubes new life.
Whether it’s the Standard 18 Strand, the Spike 15 Straight or the Squiggle 6
Strand Spline you’ll have the tools needed to give the fish a new look they
won’t be able to resist.
The spline is what makes the tail. The tube insert screws into the
spline and determines the length of the hollow tube.
| Item
Code |
Mold
Type |
No.
of Strands |
Price |
| 61-95208 |
Standard
Tube Spline |
18 |
$56.99 |
| 61-91325 |
15
Strand Tube Spline |
15 |
$56.99 |
| 61-91326 |
Squiggle
Tube Spline |
6 |
$56.99 |
Tube
Splines are not discountable.
TUBE INSERTS
The
insert screws into the spline and determines the length of the hollow the tube.
The spline is what makes the tail. When
checking out please document in the notes what tube this is for and what type of
head you want. Give us a call if you aren't sure.
| Item
Code |
Mold
Type |
Size
(inches) |
Price |
| 61-95200 |
Insert
for Tube Mold |
3/4" |
$10.99 |
| 61-95201 |
Insert
for Tube Mold |
1" |
$10.99 |
| 61-95202 |
Insert
for Tube Mold |
1.25" |
$10.99 |
| 61-95203 |
Insert
for Tube Mold |
1.5" |
$10.99 |
| 61-95204 |
Insert
for Tube Mold |
1.75" |
$10.99 |
| 61-95205 |
Insert
for Tube Mold |
2" |
$10.99 |
| 61-95206 |
Insert
for Tube Mold |
2.25" |
$10.99 |
| 61-95207 |
Insert
for Tube Mold |
4" |
$10.99 |
| 61-95199 |
Insert
for Tube Mold |
Blank |
$10.99 |
Tube
mold inserts are not discountable.
Related Items
|
Sales: 1-800-203-8427
