|
| |
| HOW TO MAKE
A MAGNUM FLASHABOU IN-LINE MUSKY SPINNER (Part 4 of
6) |
Page 1,
2, 3,
4, 5,
6 |
Tying the
Secondary Skirt:
| Essentially your are repeating
the steps used tying the primary skirt. The only difference is this skirt
has fewer strands of Magnum Flashabou.
Again, using your thread and bobbin lay a
solid base of thread on your second coil spring by wrapping thread back and forth
several times until the coil is covered with tread. Generously coat your
threaded coil with head cement and allow to dry for a few moments (figure
1).
|
figure 1
|
| Test the head cement on your
coil by touching it. If it is wet or sticky to touch you should let it dry
longer.
Using the small pile evenly distribute the
flashabou around the coil, tying them at their mid point. Use head
cement often. Half hitch and cement again. Allow cement to dry.
Your smaller secondary skirt is now complete (figure
2).
|
figure 2
|
|
|
|
|
Sales: 1-800-203-8427
